Dive Rite NiTek He Owner's Manual download pdf (Page 19)

NiTek He Owner’s Manual Page 19

 The NiTek He enters Dive mode as soon as it enters the water. It does not count a

dive as having taken place, however, unless you remain below a depth of 5.0 feet/

1.5 meters for at least three minutes.

 If you spend at least ten minutes above a depth of 5.0 feet/1.5 meters, the com-

puter will consider any further descent as a separate dive.

 If your NiTek He is in default, an audible warning will sound as you enter the

water. (Horizontal bars will also appear in the FO

and FHe display, instead of a

percentage value.) If you hear this alarm, surface and set the NiTek He for your

actual gas mixture.

Prior to descending, always check one nal time to ensure the

gas mixture settings are correct.

Figure 11 Time and temperature display. Items displayed include: 1) Current time of day; 2)

Current water temperature.

 Pressing and holding button B will cause the NiTek He to display current time of

day and temperature, as shown in Figure 11. Releasing button B returns the com-

puter to its normal Dive mode display.

While in Dive mode, you should be alert for the following warnings:

Out-of-Range The Out-of-Range warning consists of the entire display screen

blinking.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Dive Rite NiTek He Owner's Manual Page 19