Dive Rite Nitek Duo User's Guide download pdf (Page 23)

Using the NiTek Duo

NiTek Duo Dive Computer User Manual 19

5. Press Set to toggle the alarm on and off.

6. When finished, press Select to advance to the next option

(dive time alarm) or to exit, press and hold Mode for 1 to 2

seconds to return to time mode.

Setting the dive time alarm

The NiTek Duo has a dive time alarm that is activated when the

diver reaches the dive time that is set for the dive. When the dive

time is reached, an audible alarm sounds and the screen flashes

for three seconds. Dive time alarm can be used when you want to

set a maximum dive time for your dive. The alarm indicates

when this time has expired.

The alarm can be turned on or off and can be set from 10 to 590

minutes.

To set the dive time alarm:

1. Press Mode until “dive” is displayed and flashing on the

screen.

2. Press Select until the screen changes and dive time is

flashing.

3. Press Set to set the time when you want the alarm to sound.

4. Press Select.

The dive time alarm on/off flashes.

5. Press Set to toggle the alarm on and off.

6. When finished, press and hold Mode for 1 to 2 seconds to

return to time mode.

Setting the computer for metric or Imperial

operation

The NiTek Duo can calculate and give you values in Imperial

units or metric units. When in metric, depth values are expressed

in meters and temperatures are expressed in Celsius (°C). When

in Imperial, depth values are expressed in feet and temperatures

are expressed in Fahrenheit (°F).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

No comments

Dive Rite Nitek Duo User's Guide Page 23