Dive Rite NiTek He User Manual download pdf (Page 13)

CO8000 NiTek Q

www.DiveRite.com

Dive prole information is either stored in 15-second or 30-second intervals during a dive. This must be set prior to mak-

ing your dive. Refer to “Setting the Dive Log/Prole Sampling Rate” on page 10 for step-by-step instructions.

The dive number and date of the dive are displayed when you scroll through your dives, making it easy to nd the dive

prole you want to view.

1. Dive Log number – This is the dive number that corresponds

to the dive number when in LOG mode.

2. Max Depth – This is the maximum depth reached during the dive.

3. Dive Time – This is the actual bottom time for the dive.

To View a Dive Prole

1. Repeatedly press the A button until “PROF” is displayed.

2. Press the B button to enter the PROFILE mode screen.

3. Press the B button change to the prole page displaying

your most recent dive, -OR-

Repeatedly press the B button to scroll through the dive

proles from the newest to the oldest. To rapidly scroll,

press and hold the B button.

4. When nished, press and hold the A button return to the

SURFACE mode.

PC Mode

Workbench dive software allows the Q diver to perform dive planning on either a PC or MAC. An optional upgrade to the

Workbench Logbook allows you to upload dive data using a USB interface cable and view dive proles.

Before connecting the USB interface cable to your computer, be sure to download the NiTek Q Workbench TM software

rst.

For more information about how to purchase Workbench Logbook software, contact Dive Rite at [email protected].

To Enter PC Transfer Mode

1. Using a coin, remove the USB cap from the back of the NiTek Q and attach the USB interface cable to the connector.

Be sure no water gets into the compartment.

2. Connect the other end of the cable to an internet-compatible PC or MAC computer with NiTek Q Workbench TM

software installed.

3. Repeatedly press the A button on the NiTek Q until “PC” is displayed in the lower left portion of the screen.

4. Press the B button to enter the PC mode screen. “USB” Communicating” is displayed on the screen.

5. Your dive log data will automatically transfer to your PC or MAC.

6. When nished, press and hold the A button for 2-3 seconds to return to the SURFACE mode.

DIVE Mode

The DIVE computer mode is automatically entered when the computer enters the water. It begins performing its dive

calculations once you descend below 5 feet (1.5m). While in DIVE mode, the computer calculates and displays informa-

PROFILE Mode Screen

MENUS

Web Resource - For detailed instructions on how to use Workbench Logbook visit Dive RIte’s library at:

http://www.diverite.com/education/library/articles/

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Dive Rite NiTek He User Manual Page 13