Dive Rite O2ptima Owner's Manual download pdf (Page 34)

Dive Rite

Ch. 3 Pg. 14

Reset Stack Time

NEXT SELECT

Test Stack Time

NEXT SELECT

Decompress Mode

NEXT SELECT

Decompress Mode

OFF SELECT

Decompress Mode

ON SELECT

RESET STACK TIME

The “Reset Stack Time” option resets the current stack time to

the limit as set in the “Set Stack Time” option. Choosing this option

(with the RIGHT button) will prompt the diver to confirm with a LEFT button press.

TEST STACK TIME

The purpose of the “Test Stack Time” option is to allow the diver

to become familiar with the alarms generated on the secondary display, the

flash protocol on the DIVA coupled with the vibrating of the DIVA. This option sets the stack

time to one minute, with one minute remaining. This allows the diver to periodically familiarize

him/herself with the alarms without having to play with programming the stack time. Once the

alarms are confirmed the diver just has to select “Reset Stack Time” and all the previous limits are

restored. This option uses the actual stack timer, so this alarm can only be generated while in dive

mode.

DECOMPRESS MODE

The “Decompress mode” function turns the secondary dive

computer options on or off. This option is only available when the proper

secondary Deco PIN has been entered.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

No comments

Dive Rite O2ptima Owner's Manual Page 34