Dive Rite O2ptima Owner's Manual Page 53

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 52
2
O ptima FX Owner’s Manual
Ch. 6 Pg. 11
Copyright, Dive Rite All Rights Reserved January 2009
Complete Pre-Dive Checklist
Name ____________________________________ Date __________ Time __________
Primary S/N ________ Secondary S/N ________
Sensor: S/N: (1) _________ (2) _________ (3) _________ (4) _________
Date Installed: (1) _________ (2) _________ (3) _________ (4) _________
Battery: Date Installed: Primary ___________ Secondary ___________
Usage (hrs:min) Primary _____:_____ Secondary _____:_____
Initials NOTE: Initial upon completion of each task.
_____ 1. Fill oxygen and diluent cylinders.
_____ 2. Analyze oxygen ______ (99.5% min)
2
_____ 3. Analyze diluent O :______ He:______
_____ 4. Verify bailout cylinder(s)
2
Cylinder 1: Pressure ______ O %______ He%______
2
Cylinder 2: Pressure ______ O %______ He%______
_____ 5. Install oxygen and diluent cylinders.
_____ 6. Inspect Wing, Harness and Quick Releases for deterioration and damage.
2
_____ 7. Inspect and connect O and diluent 1st stage assemblies.
_____ 8. Inspect ADV and Install on Counter-Lung.
_____ 9. Inspect T-Piece and Install on Counter-Lung.
_____ 10. Install and Secure counter-lungs.
_____ 11. Connect LP hoses to Manual Addition Valves and secure HP hoses.
_____ 12. Inspect DSV/Hose assembly
_____ 13. Check DSV one way valves for proper operation.
_____ 14. Install DSV/Hose assembly to ADV and T-Piece.
_____ 15. Inspect Head O-Rings and Sensor wires, Lubricate where necessary.
_____ 16. Check service time on PRIMARY Battery: (hrs:min) _____:_____
_____ 17. Is remaining time sufficient for planned dive? YES / NO (circle answer)
_____ 18. Is the Surface Interval LESS than 24 Hours? YES / NO (circle answer)
_____ 19. If YES to #17 and #18 skip to Step #25
_____ 20. Inspect contacts on NEW battery, clean if necessary.
_____ 21. Power Up PRIMARY and the do a GO TO SLEEP (SKIP if #18 is NO).
_____ 22. Inspect battery, Battery Cap/Spring and Battery housing.
_____ 23. Clean and Add conductive lubricant when necessary.
_____ 24. Install battery positive side into Battery Housing.
_____ 25. Check service time on SECONDARY Battery: (hrs:min) _____:_____
_____ 26. Is remaining time sufficient for planned dive? YES / NO (circle answer)
_____ 27. If YES Skip to Step #31
_____ 28. Inspect battery, Battery Cap/Spring and Battery housing.
_____ 29. Clean and Add conductive lubricant when necessary.
_____ 30. Install battery positive side into Battery Housing.
_____ 31. Power on PRIMARY and SECONDARY wrist units. Record time: _____:_____
_____ 32. Verify proper solenoid operation. (If in CC mode solenoid should be firing)
Page view 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58

Comments to this Manuals

No comments